Severity: 8192
Message: Return type of CI_Session_files_driver::open($save_path, $name) should either be compatible with SessionHandlerInterface::open(string $path, string $name): bool, or the #[\ReturnTypeWillChange] attribute should be used to temporarily suppress the notice
Filename: drivers/Session_files_driver.php
Line Number: 132
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: 8192
Message: Return type of CI_Session_files_driver::close() should either be compatible with SessionHandlerInterface::close(): bool, or the #[\ReturnTypeWillChange] attribute should be used to temporarily suppress the notice
Filename: drivers/Session_files_driver.php
Line Number: 294
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: 8192
Message: Return type of CI_Session_files_driver::read($session_id) should either be compatible with SessionHandlerInterface::read(string $id): string|false, or the #[\ReturnTypeWillChange] attribute should be used to temporarily suppress the notice
Filename: drivers/Session_files_driver.php
Line Number: 168
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: 8192
Message: Return type of CI_Session_files_driver::write($session_id, $session_data) should either be compatible with SessionHandlerInterface::write(string $id, string $data): bool, or the #[\ReturnTypeWillChange] attribute should be used to temporarily suppress the notice
Filename: drivers/Session_files_driver.php
Line Number: 237
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: 8192
Message: Return type of CI_Session_files_driver::destroy($session_id) should either be compatible with SessionHandlerInterface::destroy(string $id): bool, or the #[\ReturnTypeWillChange] attribute should be used to temporarily suppress the notice
Filename: drivers/Session_files_driver.php
Line Number: 317
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: 8192
Message: Return type of CI_Session_files_driver::gc($maxlifetime) should either be compatible with SessionHandlerInterface::gc(int $max_lifetime): int|false, or the #[\ReturnTypeWillChange] attribute should be used to temporarily suppress the notice
Filename: drivers/Session_files_driver.php
Line Number: 358
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: Warning
Message: ini_set(): Session ini settings cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 282
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: Warning
Message: session_set_cookie_params(): Session cookie parameters cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 294
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: Warning
Message: ini_set(): Session ini settings cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 304
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: Warning
Message: ini_set(): Session ini settings cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 314
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: Warning
Message: ini_set(): Session ini settings cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 315
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: Warning
Message: ini_set(): Session ini settings cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 316
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: Warning
Message: ini_set(): Session ini settings cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 317
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: Warning
Message: ini_set(): Session ini settings cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 375
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: Warning
Message: ini_set(): Session ini settings cannot be changed after headers have already been sent
Filename: drivers/Session_files_driver.php
Line Number: 108
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: Warning
Message: session_set_save_handler(): Session save handler cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 110
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Severity: Warning
Message: session_start(): Session cannot be started after headers have already been sent
Filename: Session/Session.php
Line Number: 143
Backtrace:
File: /home/softhills/softhills.co.in/indiainframart/application/controllers/Dynamic.php
Line: 8
Function: __construct
File: /home/softhills/softhills.co.in/indiainframart/index.php
Line: 319
Function: require_once
Jaipuria Brothers Electricals Pvt. Ltd. manufacture gang operated air break off load, disconnecting switch with triple pole. Each pole consists of galvanized steel base, H.T. insulators as per B.S.S./I.S. non-ferrous knife and spring loaded contacts, arcing horns of adequate section to break magnetizing current of the transformers horizontal G.I. pipe 01 adequate length for phase separation, adequate length of G.I. pipes for operation from ground level and operating handle complete in both OFF and ON position. All ferrous parts are hot dipped galvanized and non ferrous parts are heavily tinned to withstand extreme weather. Manufactured in accordance with I.S.S., this product is suitable for horizontal vertical mounting.
| Sl. No. | Air Break Isolating Switches available in Rocking Tilting Type & Rotating Type |
|---|---|
| 1 | 11 KV 200 Amps 3 insulator |
| 2 | 11 KV 200 Amps 2 insulator |
| 3 | 11 KV 400 Amps 3 insulator |
| 4 | 11 KV 630 Amps 3 insulator |
| 5 | 11 KV 200 Amps 3 insulator rocking type air break switch with single action make and break (Horizontal Type) |
| 6 | 11 KV 400 Amps 3 insulator rocking type air breaks switch with single action make and break "Horizontal Type" |
| 7 | 11 KV 200 Amps air break switch with drop out fuse set 12 insulators |
| 8 | 11 KV 400 Amps air break switch with dropout fuse set insulators |
| 9 | 11 KV switch fuse unit 9 insulator with lighting arrestors |
| 10 | 22 KV 200 Amps 3 insulator Vertical type DOUBLE STACK type |
| 11 | 22 KV 400 Amps 3 insulator Vertical type DOUBLE STACK type |
| 12 | 22 KV 200 Amps 3 insulator Vertical type DOUBLE STACK type |
| 13 | 22 KV 400 Amps 3 insulator Vertical type DOUBLE STACK type |
| 14 | 33 KV 200 Amps 3 insulator Vertical type DOUBLE STACK type |
| 15 | 33 KV 400 Amps 3 insulator Vertical type DOUBLE STACK type |
Request a Quote For Air Break Isolating Switches
| Sl. No. | Spare for Switches available from 11 KV to 33 KV |
|---|---|
| a | Male contact/moving contact blade |
| b | Female contact/Fix contact jaw |
| c | Tinned copper flexible jumper 200A/400A |
| d | MS jumper carrier |
| e | Back connector plate |
| Sl. No. | Rotating Type Switch available from 22 KV to 33 KV |
|---|---|
| 1 | 200 Amp. horizontal mounting |
| 2 | 400 Amp. horizontal mounting |
| 3 | 200 Amp./ 1400 Amp with earth switch |
| Sl. No. | Particulars | Technical Particulars |
|---|---|---|
| 1 | Manufacturer's type / Designation / Installation | 11 KV 200, A Tilting type |
| 2 | a) Manufacturer's name and country of manufacture | M/s. Jaipuria Brothers Electricals Pvt. Ltd., Delhi |
b) Works Address | F-16 -17, Ganga Vihar, Gokul Puri Shahdara Delhi | |
| 3 | Standard (s) according to which the isolators are manufactured | IS 9921 / Part I to V |
| 4 | Maximum design voltage at which the isolators can operate | 12 KV |
| 5 | Rated Frequency | 50 Hz. |
| 6 | Rated Voltage | 12 KV |
| 7 | Continuous current rating | 200 A |
| 8 | Rated short time withstand current for one second | - |
| 9 | Voltage drop across terminals | As per relevant IS |
| 10 | Current density at the minimum cross section of | |
a) For copper parts ( Amp. /sq . Mm) | Less than 2.5 | |
b) For aluminum parts (Amp. Sq/ mm) | Less than 1.0 | |
| 11 | Maximum temperature rise of following current carrying parts when carrying rated current continuously (deg. C) over an ambient of 50 deg . C Instead of 40 deg. C mentioned in relevant IS | 25°C |
| 12 | Class (outdoor) | Outdoor |
| 13 | Insulation levels. | |
| i) | impulse withstand voltage (KV peak) | |
| a) Across the isolating distance | 85 KV | |
| b) Phase to earth | 75 KV | |
| ii) | Power Frequency withstand voltage (KV rms) | |
| a) Phase to earth | 28 KV | |
| b) Across the isolating distance | 32 KV | |
| 14 | Minimum clearance in air (mm) center to center between phase to phase | 600 mm |
| 15 | Minimum distance between insulators | As per drawing to be approved |
| 16 | Minimum Isolating distance (in open position) | 375 mm |
| 17 | Design & Construction : | |
| i) | Number of insulators Per Pole | 3 nos. |
| ii) | Number of breaks Per Pole | Single |
| iii) | Type of closing / opening mechanism | Vertical |
| 18 | Height of contacts | 110 mm |
| 19 | Cross section and number of fixed contact leafs | 2 nos., 38 mm x 3.0 mm thick |
| 20 | Cross section of moving blade | 32 mm x 5 mm |
| 21 | Size and numbers of spring used in fixed contact | 4 nos, 16 SWG, 28 mm long, 15 mm OD & 6 turns |
| 22 | All Current carrying copper parts should be suitable to have current density less than | 2.5 A/ sq. / mm |
| 23 | All Current carrying aluminum parts should be suitable to have current density less than | 1.0 A/ sq/ mm |
| 24 | Operating pipe (handle & rod) | 25 mm NB, 5.0 meter long med, class |
| 25 | Type of bearings | Rocking type lever supported on side plates with self lubricated nylon rings |
| 26 | Base channels | 75 mm x 10 mm x 100 mm long |
| 27 | Post Insulators | |
| a) Type | 11 KV, E-22, IS 2544 | |
| b) Name of manufactures | Name of manufactures | |
| c) Height of each insulator | 245 mm | |
| d) Tensile strength (Kg) | 20 KN | |
| e) Compressive strength | 40 KN | |
| f) Torsional strength in (Kg m) | 340 MN | |
| g) Cantilever strength upright | 9 KN | |
| h) Power frequency dry flash over voltage (KV) rms | As per relevant IS | |
| i) Power frequency we flash over voltage (KV) rms | As per relevant IS | |
| j) Impulse flash over voltage (positive wave ) (KV) peak | As per relevant IS | |
| k) Impulse with stand voltage (KV) peak | 75 | |
| l) Power frequency puncture voltage (KV) rms | As per relevant IS | |
| m) Visible discharge voltage level (KV) rms | 9 | |
| n) Cree page distance | 300 mm (min) |
New Delhi, Delhi
Manufacturer
2 Produtcs
Ask for more details from the seller
Contact Seller
