Wooden Cooling Towers


Wooden Cooling Towers

This rugged war horse in our stables, incorporate multi blade, cast aluminum, adjustable pitch fan assembly driven by special T.E, IP-55 protected Geared Motor with low R.P.M and higher air discharge capacities. The tower structural and supporting sections are HDG Steel, fastened with SS fasteners, and suited for hot, harsh and humid atmospheric industrial conditions.

The standard cladding profile of corrugated asbestos cement sheet, the joints of which are lapped to minimize water spillage. The Treated Wooden Splash bars, the fill media, are supported on FRP Grids to ensure positive and permanent positioning. The wooden splash bars are of imported pine woods, chemically treated to arrest fungal or algae formations. The design incorporates accommodation of waters with very high TDS factors The hot water from the source when circulated to the collection basin with flower pot nozzles, are sprayed over the fill area. Simultaneously, air is induced through the fill media thus taking away the latent heat from the water passing through the fill media.

This mechanism is called as induced draft cross flow cooling

The hot water from the source when circulated to the collection basin having the flower pot nozzles, are sprayed over the fill area which are located exactly below the collection basin.

These towers are generally constructed over RCC sumps designed to accommodate the towers and ensuring adequate air are drawn in to the tower and without escaping else where.

Portions of water evaporated, removes the heat from the remaining water. The warm moist air is drawn through the fan deck is discharged to the atmosphere. Cold water, collected at the collection sump, is re-circulated to the heat source.

Indore, Madhya Pradesh


10 Produtcs

Windx Solutions Pvt. Ltd

Ask for more details from the seller

Contact Seller

Recommended Products

View All

View All